rc_cube
25.04
  • Introduction
    • Overview
    • Warranty
    • Applicable standards
      • Interfaces
    • Glossary
  • Safety
    • General warnings
    • Intended use
  • Installation
    • Software license
    • Power up
    • Discovery of rc_cube devices
      • Resetting configuration
    • Network configuration
      • Host name
      • Automatic configuration (factory default)
      • Manual configuration
    • Connection of cameras
      • Basler blaze sensors
  • Measurement principles
    • Stereo vision
    • General information on 3D data
      • Computing disparity images
      • Computing depth images and point clouds
      • Confidence and error images
  • Camera pipelines
    • Configuration of camera pipelines
    • Configuration of connected cameras
  • Software modules
    • Camera module
      • Rectification
      • Viewing and downloading images
      • Pipeline types rc_visard and rc_viscore
        • Parameters
        • Status values
        • Services
      • Pipeline type stereo_ace
        • Parameters
        • Status values
        • Services
      • Pipeline type zivid
        • User-defined presets
        • Parameters
        • Status values
        • Services
      • Pipeline type blaze
        • Parameters
        • Status values
        • Services
    • 3D modules
      • Viewing and downloading images and point clouds
      • Stereo matching module
        • Parameters
        • Status values
        • Services
      • Zivid module
        • User-defined presets
        • Parameters
        • Status values
        • Services of the rc_zivid module
      • Blaze module
        • Parameters
        • Status values
        • Services
    • Detection & Measure modules
      • Measure
        • Introduction
        • Measuring Depth
        • Interaction with other modules
        • Parameters
        • Status values
        • Services
        • Return codes
      • LoadCarrier
        • Introduction
        • Detection of load carriers
        • Detection of filling level
        • Interaction with other modules
        • Parameters
        • Status values
        • Services
        • Return codes
      • TagDetect
        • Introduction
        • Tag reading
        • Pose estimation
        • Tag re-identification
        • Hand-eye calibration
        • Parameters
        • Status values
        • Services
        • Return codes
      • ItemPick and ItemPickAI
        • Introduction
        • Computation of grasps
        • Setting the preferred orientation of the TCP
        • Interaction with other modules
        • Parameters
        • Status values
        • Services
        • Return codes
      • BoxPick
        • Introduction
        • Detection of items
        • Computation of grasps
        • Setting the preferred orientation of the TCP
        • Interaction with other modules
        • Parameters
        • Status values
        • Services
        • Return codes
        • BoxPick Template API
      • SilhouetteMatch
        • Introduction
        • Base-plane calibration
        • Setting a region of interest
        • Setting of grasp points
        • Setting the preferred orientation of the TCP
        • Setting the sorting strategies
        • Detection of objects
        • Interaction with other modules
        • Parameters
        • Status values
        • Services
        • Internal services
        • Return codes
        • Template API
      • CADMatch
        • Introduction
        • Setting of grasp points
        • Setting of pose priors
        • Setting the preferred orientation of the TCP
        • Setting the sorting strategies
        • Detection of objects
        • Interaction with other modules
        • Parameters
        • Status values
        • Services
        • Internal services
        • Return codes
        • Template API
    • Configuration modules
      • Hand-eye calibration
        • Calibration interfaces
        • Camera mounting
        • Calibration routine
        • Parameters
        • Services
      • CollisionCheck
        • Introduction
        • Collision checking
        • Parameters
        • Status values
        • Services
        • Return codes
      • Camera calibration
        • Calibration process
        • Parameters
        • Services
      • IO and Projector Control
        • Parameters
        • Services
    • Database modules
      • LoadCarrierDB
        • Introduction
        • Load carrier definition
        • Load carrier compartments
        • Interaction with other modules
        • Services
        • Return codes
      • RoiDB
        • Introduction
        • Region of interest
        • Interaction with other modules
        • Services
        • Return codes
      • GripperDB
        • Introduction
        • Setting a gripper
        • Services
        • Return codes
        • CAD element API
  • Interfaces
    • Web GUI
      • Accessing the Web GUI
        • Access to the rc_visard Web GUI
      • Exploring the Web GUI
      • Web GUI access control
      • Downloading camera images
      • Downloading depth images and point clouds
    • GigE Vision 2.0/GenICam image interface
      • GigE Vision ports
      • Important GenICam parameters
      • Important standard GenICam features
        • Category: ImageFormatControl
        • Category: AcquisitionControl
        • Category: AnalogControl
        • Category: DigitalIOControl
        • Category: TransportLayerControl / PtpControl
        • Category: Scan3dControl
        • Category: ChunkDataControl
      • Custom GenICam features of the rc_cube
        • Category: DeviceControl
        • Category: AcquisitionControl
        • Category: Scan3dControl
        • Category: DepthControl
      • Chunk data
      • Provided image streams
      • Image stream conversions
    • REST-API interface
      • General API structure
      • Migration from API version 1
      • Available resources and requests
        • Nodes, parameters, and services
        • Pipelines
        • UserSpace
        • System and logs
      • Data type definitions
      • Swagger UI
    • KUKA Ethernet KRL Interface
      • Ethernet connection configuration
      • Generic XML structure
        • Return code
      • Services
        • Request XML structure
        • Response XML structure
      • Parameters
      • EKI XML configuration files
      • Migration to firmware version 22.01
      • Example applications
      • Troubleshooting
    • gRPC image stream interface
      • gRPC service definition
      • Image stream conversions
      • Example client
    • OPC UA interface
    • Time synchronization
      • NTP
      • PTP
      • Setting time manually
  • UserSpace
    • Configuration
      • Configure UserSpace via local monitor
        • Enable UserSpace
        • Disable UserSpace
        • Reset UserSpace
      • Configure UserSpace via the Web GUI
    • Configure HTTP proxy
    • View running applications
    • Network access to UserSpace applications
    • Examples
    • Interfaces
    • Restrictions
  • Maintenance
    • Creating and restoring backups of settings
    • Updating the firmware
    • Restoring the previous firmware version
    • Rebooting the rc_cube
    • Updating the software license
    • Downloading log files
  • Troubleshooting
    • Camera-image issues
    • Depth/Disparity, error, and confidence image issues
    • GigE Vision/GenICam issues
  • Contact
    • Support
    • Downloads
    • Address
  • Appendix
    • Pose formats
      • Rotation matrix and translation vector
        • Conversion from rotation matrix to quaternion
        • Conversion from quaternion to rotation matrix
      • ABB pose format
      • FANUC XYZ-WPR format
        • Conversion from FANUC-WPR to quaternion
        • Conversion from quaternion to FANUC-WPR
      • Franka Emika Pose Format
        • Conversion from transformation matrix to quaternion
        • Conversion from Rotation-XYZ to quaternion
        • Conversion from quaternion and translation to transformation
        • Conversion from quaternion to Rotation-XYZ
        • Pose representation in RaceCom messages and state machines
      • Fruitcore HORST pose format
      • Kawasaki XYZ-OAT format
        • Conversion from Kawasaki-OAT to quaternion
        • Conversion from quaternion to Kawasaki-OAT
      • KUKA XYZ-ABC format
        • Conversion from KUKA-ABC to quaternion
        • Conversion from quaternion to KUKA-ABC
      • Mitsubishi XYZ-ABC format
        • Conversion from Mitsubishi-ABC to quaternion
        • Conversion from quaternion to Mitsubishi-ABC
      • Universal Robots pose format
        • Conversion from angle-axis format to quaternion
        • Conversion from quaternion to angle-axis format
      • Yaskawa Pose Format
        • Conversion from Yaskawa Rx, Ry, Rz to quaternion
        • Conversion from quaternion to Yaskawa Rx, Ry, Rz
rc_cube
  • rc_cube >
  • Roboception rc_cube User Manual

Roboception rc_cube User ManualΒΆ

  • Introduction
    • Overview
    • Warranty
    • Applicable standards
    • Glossary
  • Safety
    • General warnings
    • Intended use
  • Installation
    • Software license
    • Power up
    • Discovery of rc_cube devices
    • Network configuration
    • Connection of cameras
  • Measurement principles
    • Stereo vision
    • General information on 3D data
  • Camera pipelines
    • Configuration of camera pipelines
    • Configuration of connected cameras
  • Software modules
    • Camera module
    • 3D modules
    • Detection & Measure modules
    • Configuration modules
    • Database modules
  • Interfaces
    • Web GUI
    • GigE Vision 2.0/GenICam image interface
    • REST-API interface
    • KUKA Ethernet KRL Interface
    • gRPC image stream interface
    • OPC UA interface
    • Time synchronization
  • UserSpace
    • Configuration
    • Configure HTTP proxy
    • View running applications
    • Network access to UserSpace applications
    • Examples
    • Interfaces
    • Restrictions
  • Maintenance
    • Creating and restoring backups of settings
    • Updating the firmware
    • Restoring the previous firmware version
    • Rebooting the rc_cube
    • Updating the software license
    • Downloading log files
  • Troubleshooting
    • Camera-image issues
    • Depth/Disparity, error, and confidence image issues
    • GigE Vision/GenICam issues
  • Contact
    • Support
    • Downloads
    • Address
  • Appendix
    • Pose formats
Next

© Copyright 2025, Roboception GmbH.

Options en
Languages
en
de
Versions
v20.10
v20.11
v21.01
v21.04
v21.07
v21.10
v22.01
v22.04
v22.07
v22.10
v23.01
v23.04
v23.07
v23.10
v24.01
v24.04
v24.07
v24.10
v25.01
v25.04
Downloads
PDF (en)
PDF (de)